EBOO Filters, Tubing, Accessories, and Supply Checklist

A consolidated reference for facilities maintaining ongoing supply continuity. Use it as a starting point for internal reorder planning across filters, tubing, machine accessories, and ancillary supplies.

Reorder cadence by usage

Light research use (1–3 experimental cycles / month): reorder Filters & Lines Complete Kit (10-pack) every 12 weeks.
Moderate use (4–8 cycles / month): reorder every 4–8 weeks.
High use (9+ cycles / month): reorder every 2–4 weeks, or set up recurring delivery via bulk/wholesale.
Keep a buffer of at least one full 10-pack kit at all times to avoid protocol interruption.

1. Filters

Primary filter SKU in use
Quantity required per research cycle
Buffer stock target
Membrane specification confirmed (PES H200 high-flux)
Filter form-factor / connector standard confirmed
Single-use — do not reuse between experiments
Browse EBOO Filters listings

2. Tubing and line sets

Matching line set or kit configuration
Connector or component variations to confirm
Luer-lock geometry verified (6 ft / 3 ft silicone tubing options)
Cuvette vs no-cuvette line kit selected for your protocol
Reorder cadence aligned to filter consumption
Browse EBOO Lines & Tubing listings

3. Machine-side accessories

Peristaltic pump and related accessories
Ozone destruct components
Cart and workstation accessories where used
Browse EBOO Machines and accessories

4. Supply kits — what's in each

Filters & Lines Complete Kit (10-pack, $795): 10 single-use kits, each with silicone tubing, line set, and dry PES filter.
Lines "No Cuvette" Kit (10-pack, $500): 10 tubing + line sets, no cuvette, no filter.
Lines + Filter, no-cuvette (10-pack, $635): 10 tubing + line + dry PES filter, no cuvette.
Lines + Cuvette (10-pack, $670): 10 tubing + line + cuvette, no filter.
Silicone tubing 6 ft ($35) / 3 ft ($20): luer-lock silicone tubing segments.
Browse all EBOO supply kits.

5. Documentation

Acknowledgment of research-use-only status
Internal SKU records and reorder logs
Records consistent with the facility's procurement standards

6. Open questions to resolve before ordering

Has compatibility been confirmed with the equipment in use?
Is the requested kit configuration the same as the last cycle?
Are lead times and delivery windows acceptable?
Is buffer stock >= 1 kit at time of reorder?

If any of the above are uncertain, request a compatibility review or contact supply support.

Research-use status

All categories above are offered for research use only and are not intended for diagnostic, therapeutic, or patient-use purposes unless expressly authorized and compliant with applicable law.