EBOO Filter & Tubing Compatibility

Before ordering EBOO filters, tubing, or line sets, verify machine generation (EBOO O3 vs EBO2), operating mode (3–5 gamma vs 20–30 gamma), filter membrane specification (PES H200), and connector standard used by your existing circuit. Request a free compatibility review by emailing info@eboofilters.com with a photo of your current setup.

EBOO & EBO2 compatibility at a glance

  • Operating mode: EBOO mode runs at a nominal 3–5 gamma (3–5 µg/mL) ozone concentration; EBO2 mode runs at 20–30 gamma (20–30 µg/mL).
  • Filter membrane: The 2026 EBOO O3 Research Device uses a PES H200 high-flux polyethersulfone (dialyzer-style) filter. Browse compatible EBOO filters.
  • Connectors: Line sets and silicone tubing use standardized luer-lock connectors. Browse EBOO lines & tubing.
  • Kits: Filters & Lines Complete Kit (line set + cuvette + filter), Lines + Filter (no cuvette), Lines + Cuvette (no filter), and Lines “No Cuvette”. See EBOO supply kits.
  • Single-use: All filters, tubing, and line sets are sterile, single-use research disposables — one research cycle each.
  • Verify before ordering: Confirm machine generation (EBOO O3 vs EBO2), operating mode, membrane spec (PES H200), tubing inner diameter and length, and luer-lock standard against your existing circuit.

Research Use Only. Not a medical device and not FDA-cleared or approved for clinical use. Purchasers are responsible for verifying compatibility and applicable requirements.

Frequently asked questions

What filter does the EBOO O3 Research Device use?

The 2026 EBOO O3 Research Device uses a PES H200 high-flux polyethersulfone (dialyzer-style) filter. Compatible replacement filters and complete Filters & Lines kits are stocked on this site. Verify membrane type, surface area, and port geometry against your existing configuration before ordering.

Are EBOO and EBO2 filters and lines compatible?

EBOO mode runs at a nominal 3–5 gamma (3–5 µg/mL) ozone concentration and EBO2 mode at 20–30 gamma (20–30 µg/mL). The PES H200 filter modules and luer-lock line sets stocked for EBOO O3 research circuits are compatible with EBO2 research configurations that share the same form factor and connector standard. Confirm your connector standard before ordering.

What connector standard do EBOO lines use?

EBOO line sets and silicone tubing use standardized luer-lock connectors to join segments to the filter, ports, and the machine. Confirm tubing inner diameter, length, and luer-lock standard against your current line set before ordering.

Which EBOO supply kit fits my circuit?

Options include the Filters & Lines Complete Kit (line set + cuvette + filter), Lines + Filter (no cuvette), Lines + Cuvette (no filter), and a Lines No Cuvette set (no filter). Choose based on whether your protocol already stocks a cuvette or a filter. See the EBOO Supply Kits page for kit contents.

Are EBOO filters, tubing, and line sets reusable?

No. All EBOO and EBO2 filters, tubing, and line sets are supplied as sterile, single-use research disposables for one research cycle each and must not be reused between experiments.

Are EBOO products FDA-cleared or medical devices?

No. All EBOO Filters products are supplied for controlled laboratory and research use only. They are not FDA-cleared or approved and are not medical devices.

Is your compatibility information a guarantee of fit?

No. The information provided is general procurement guidance for research-use buyers. Buyers are responsible for independent verification and for ensuring intended use complies with applicable law and institutional policy.