EBOO Equipment Support & Documentation

Reference documentation, orientation resources, and technical support for the 2026 EBOO O3 Research Device, EBOO filters, tubing, and line sets used in controlled laboratory research. Contact info@eboofilters.com for institution-specific orientation materials.

What's included with every EBOO O3 Research Device

  • Operator manual plus setup, calibration, and parameter-control references.
  • Safety-procedure protocols and troubleshooting guidance.
  • Consumable installation and replacement instructions (PES H200 filter, tubing, line sets).
  • Onsite or live virtual orientation on request, plus self-guided video documentation.

EBOO O3 five-stage research process flow

  1. Fluid medium introduction — medium enters the closed-loop circuit.
  2. Gas infusion — controlled ozone/oxygen infusion.
  3. Particulate filtration — through the PES H200 high-flux filter.
  4. UV light exposure — controlled-spectrum UVBI chamber stage.
  5. Medium return — processed medium exits the circuit.

Operating specifications documented

  • Operating modes: EBOO mode 3–5 gamma (3–5 µg/mL); EBO2 mode 20–30 gamma (20–30 µg/mL).
  • Filter membrane: PES H200 high-flux polyethersulfone (dialyzer-style). Browse EBOO filters.
  • Connectors: standardized luer-lock line sets and silicone tubing. Browse EBOO lines & tubing.
  • Consumables: sterile, single-use per research cycle. See EBOO supply kits.
  • Equipment: the 2026 EBOO O3 Research Device integrates a peristaltic pump, UVBI chamber, and safety interlocks.

Research Use Only. Not a medical device and not FDA-cleared or approved for clinical use. Documentation and orientation support qualified researchers operating equipment in controlled laboratory settings.

Frequently asked questions

What documentation is included with the EBOO O3 Research Device?

Every EBOO O3 Research Device 2026 ships with an operator manual, a setup and calibration reference, safety-procedure protocols, consumable installation instructions, and troubleshooting guidance for controlled laboratory research use.

How does the EBOO O3 Research Device process flow work?

The device runs a closed-loop, five-stage research process: (1) fluid medium introduction, (2) controlled ozone/oxygen gas infusion, (3) particulate filtration through the PES H200 filter, (4) UV light exposure in the UVBI chamber, and (5) processed medium return.

Do you provide onsite or virtual orientation for the EBOO O3?

Yes. Equipment orientation is available onsite at your facility or as a live virtual session, alongside self-guided written and video documentation. Email info@eboofilters.com to schedule.

What operating parameters does EBOO device documentation cover?

Documentation covers EBOO mode at 3–5 gamma (3–5 µg/mL) and EBO2 mode at 20–30 gamma (20–30 µg/mL), peristaltic pump flow control, UVBI chamber operation, PES H200 filter installation, and luer-lock line-set connection.

How are EBOO consumables installed and replaced?

EBOO filters, tubing, and line sets are sterile, single-use, and connect tool-free with luer-lock fittings. Install a fresh PES H200 filter, tubing, and line set each research cycle; the EBOO supply kits page lists kit contents and the step-by-step replacement procedure.

Is orientation required to purchase the EBOO O3 Research Device?

No. Technical documentation and support resources are included with every device; onsite or virtual orientation is optional and provided on request for qualified research teams.

Is the EBOO O3 Research Device FDA-cleared or a medical device?

No. The EBOO O3 Research Device and all EBOO consumables are supplied for controlled laboratory and research use only. Not a medical device and not FDA-cleared or approved for clinical use.