Skip to main content
Back to Blog
Guides

EBOO Compatibility: Information to Check Before Ordering

Match filters, tubing, line sets and accessories to the documented EBOO device configuration before ordering.

EBOO Filters Research TeamJuly 8, 20263 min read

Start with the equipment label and exact part reference

“EBOO,” “EBO2” and “Gen 2” are not enough information to confirm that a filter, line set, pump or accessory fits your equipment. Identify the exact device and requested component before ordering. This page explains what to collect for a compatibility review; it is not a universal model-to-part match chart.

Prepare one identification record per device

InformationWhere to look
Manufacturer, model and revisionEquipment label and supplied manual
Serial or internal asset referenceEquipment record; share only when needed for identification
Current component manufacturer and part numberComponent label, unopened package or prior order record
Requested productExact catalog link or SKU, not only a general category name
Line-set and filter referencesTheir own labels or packaging; record each separately
Connector informationManufacturer designation in the documentation and clear photos of the relevant connections
Pump or accessory informationExisting label, mounting details and documented interface, where relevant
Configuration changesKnown replacements, modifications or uncertain prior substitutions
Order scopeFilter only, line set, complete kit, service component or complete assembly

If a field is unknown, say so. Do not infer connector dimensions, power requirements or approved substitutions from appearance. A previous purchase helps identify an item but does not prove that a different current listing is compatible.

Photographs help identify a part; they do not prove fit

Provide clear images of accessible labels, unopened packaging and the relevant connection points when requested. Do not disassemble equipment or disturb a connected circuit to obtain a photograph. Exclude patient information, faces, payment details and other confidential material.

Keep the machine label, filter label and line-set label distinct. A photo of one component is not a record of every part in the configuration. For missing tubing records, see how to identify EBOO tubing. For connector identification, see the connector selection guide.

Ask for a documented answer to the exact request

Use the compatibility information request with your device record and proposed product link. Ask the supplier to confirm:

  1. The exact equipment model and revision covered by the answer.
  2. The product reference and package configuration being matched.
  3. The manufacturer document or other stated basis for the match.
  4. Any unresolved limitation, required related component or excluded configuration.

Physical connection alone does not establish suitability. If documentation is incomplete or conflicts with the installed configuration, resolve the difference before ordering. Do not add an adapter or substitute a component based only on a similar photograph.

Keep confirmation with the next order

Save the dated response, applicable document revision and exact product reference in the equipment's purchasing record. Review that record when the device changes, a listing changes or a different supplier is proposed.

For order contents, use the kit contents guide. For quantities, use the reorder guide. These are separate questions from compatibility.

This checklist does not replace the supplied instructions, qualified installation or service review, or applicable purchasing and account requirements.

Tags

EBOO compatibilityEBOO linesEBOO filtersconnectors

Frequently Asked Questions

What is the correct order of operations?

Identify the machine first, then match filters, line sets, and accessories to that documented configuration.

How should a site with several devices keep purchasing records?

Keep a separate model, revision and component-reference record for each device or documented equipment group. Match the proposed product to that record instead of relying on a general product name.

What information should be on hand before ordering?

Model, generation, any configuration or serial information on the equipment label, and a photo of the relevant connection points if a part reference is missing.

Related guides

Explore Our Research Equipment

See how the EBOO O3 Research Device 2026 can support your laboratory experiments.

Get research-buyer updates

Product updates & restock notices for research buyers. No medical claims. Unsubscribe anytime.