EBOO Filter Comparison
Published manufacturer specifications for five filter options side by side, with the Nipro Cellentia-15H supplied in our Nipro kits shown last.
| Specification | ABLE [1][2] | Nipro ELISIO-H [3] | Other PES/PS | RENAK CTA [4] | Nipro Cellentia-15H [5][6] (In our Nipro kits) |
|---|---|---|---|---|---|
| Manufacturer | Guangdong Baihe | Nipro | Varies by model | SB-Kawasumi | Nipro |
| Membrane | Not specified in cited sheet | Polyethersulfone (PES), Polynephron | PES or polysulfone (PS), model-dependent | Cellulose triacetate (CTA) | Cellulose triacetate (CTA) |
| Comparison scope | A-40/A-60/A-80/A-200 models | ELISIO-H family, 09H through 25H | A category, not one product | RENAK CTA family | Exact 15H model supplied in our kits |
| Membrane surface area | 1.4/1.6/1.8/2.0 m² | 0.9–2.5 m² by model | Varies | 1.2/1.5/2.0 m² | 1.5 m² |
| Blood-compartment volume | 78–108 mL by model | 62–149 mL by model | Varies | Not specified in cited source | 87 mL |
| Sterilization | Not specified in cited sheet | Dry gamma | Varies | Gamma, wet-type | Dry gamma |
| Housing | Not specified in cited sheet | Polypropylene | Varies | Not specified in cited source | Polypropylene |
| BPA / DEHP | Not specified in cited sheet | Manufacturer states not made with BPA; DEHP not specified in cited brochure | Check exact model documents | Not specified in cited source | Manufacturer states not made with BPA or DEHP |
The filter is made in Japan (this applies to the filter only, not the whole kit).
Choose this if your configuration needs a cuvette for each run.
Choose this if you already have cuvettes or your configuration does not use one.
Browse the full EBOO filters, tubing & supply kits catalog or ask us to check compatibility.
Figures are the manufacturers' published dialyzer specifications. Research/laboratory use only.